How to Inspect a Conex Box before Purchasing It for Your Project
Whether you are exporting products or building a home addition, a Conex box could be the perfect material to use. Originally designed for transporting goods across distances, it will definitely keep your products secure and properly stored until they reach their destination. You’ll also benefit a lot if you use a Conex box for your construction project instead of traditional materials, since it already has the major structural features you need, such as wall and frame.
There’s no doubt how much you can save when you use a Conex box for any applications. It may cost a little more than traditional materials but it can easily be eclipsed by the savings you can make in the long run. Nevertheless, there’s one way you can avoid the high cost, especially if you’ve just put up your export business or you are using shipping containers to build your home addition for the first time. That solution is to use used shipping containers.
Preowned or used products are always associated with substandard or low quality. Although it’s obvious that used products are no longer as good as brand-new ones, it doesn’t mean they are no longer useful. When it comes to shipping containers, used units that are still seaworthy are actually still reliable. All you need to make sure that they would get the most bang for your buck is to carefully inspect each unit you are planning to purchase. Here’s how the inspection should go.
Everything Should Be Parallel
Technically, not all parts of a Conex box are made parallel, but it helps to ensure that all sides of look straight, vertical or horizontal, and equidistant from each other. Any irregularities could mean the box is no longer windproof or waterproof. Having said that, the first thing you should do is to go to the far end of the container and look back along the top rails to see if there are areas that aren’t straight. Do not pick containers that have slanting sides, no matter how slight the deformation is. Such a tiny issue could actually mean disaster for your business down the road.
Rust Should Be Skin-Deep
You can hardly find used shipping containers that do not have a little bit of rust on its surface. This rust, however, does not immediately mean that the container is no longer safe to use. Unless the rust has spread within the metal panels, which you can tell by scratching the surface with a sharp metal or even a piece of coin, it’s safe to say that the shipping container you’re looking at is still seaworthy or structurally stable. With a fresh coat of paint, you can restore the protective layer of the shipping container and hide all its imperfections at the same time.
All Mechanical Parts Must Be Working Properly
The main mechanism of a shipping container is found on its door. Each type of shipping container has a different type of door, and therefore a different kind of opening and closing mechanism. Make sure to check if the door is opening and closing properly. If it’s jammed, there’s a chance that it’s not just the door that’s having a problem but other areas, too. If possible, this is the first part you should check.
There are many other areas that you need to check on the shipping container you’re planning to purchase, including the underside, the floor, and the roof. Dents and scratches can be fixed but large cracks and punctures may indicate the need for a newer unit. To make sure that you will pick the highest quality unit even with minimal inspection is to go to a reputable supplier like Equipment Management Services. Not only do they have a vast off-dock storage and maintenance facility that can ensure you many options, but they are also committed to providing only the best products.
10 Things You Need To Know BEFORE You Buy A Shipping Container, offgridworld.com